コナジラミの標本作成方法 ▶加熱処理

加熱処理

エタノールに浸けて80°C程度で加熱する。 軟弱個体でのみ行っている。 効果の程はよくわからない。 特にKOHの前に漂白する場合はこの処理を行わないとうまく漂白されない。

  1. マイクロチューブ70%エタノールと検体を入れ 脱脂綿などで栓をして 80°Cで10分間湯煎にする。
  2. 5分ほど自然空冷する
加熱処理

加熱処理

注意事項

考察

この工程はEPPO2004(Martin1978改)を参考にした。 ただし丈夫な検体では行っていない。 効果があるのかどうかはよくわからない。

Place about 10 specimens into 70-90% ethanol in a watch glass, cover with a glass square and heat gently to around 80°C for 5-10 minutes. Fixation in hot alcohol hardens specimens and makes them less fragile, so they lose fewer setae during mounting. Add a few drops of cold 10% KOH to cool the alcohol. Pipette off the alcohol and KOH using a fine glass teat pipette, taking care not to accidentally suck up the specimens.

KOHを加えろと書かれているがやってない。 すぐに次の処理に移れるようにするためかもしれない。

Henderson2011にも同じような処理が書かれている。

Optional first heat treatment: recommended for samples previously stored dried, for those stored in ethanol for a long time, and generally for any where speed is not critical. Transfer the scales to a heat resistant glass tube (test tube) that has about 1 cm depth of 95% ethanol in it; put a bung of cotton wool in the top; place the tube in a water bath (about 95°C), and heat for 2 minutes.